1168 - ACT Upgrade
From eMDeeWiki
Jump to navigationJump to searchStudent Station
Downloads
Student Application Complete Installation - v1.0.0 - updated 25Sep15
Student Application Executable Only - v0.0.6 - updated 21May15
Configuration
- Files will be installed to the folder: C:\Program Files\ActVirtualPanels
- The station number is set by the 4th octet of the IP address of the student station computer. Valid values are 1 through 16. For example, the student station with IP address 192.168.110.5 will be configured as student station #5.
- Verify the IP sub-net of the instructor-student network by opening ActStudent.cfg and make sure that "IPSubNet=" is correct. For example, if the student station IP address is 192.168.110.5, then set IPSubNet=192.168.110.255. If the IPSubNet entry does not exist in the configuration file, the ACT software will use 192.168.110.255 by default.
- Verify the correct Instructor IP address by opening ActStudent.cfg and make sure that "InstructorIP=" setting is the correct IP address of the instructor station computer. The value can be set to an IPv4 address in dotted notation or to the Windows machine name of the instructor station computer.
- Use the Windows Sound Control Panel to make sure that the headset being used for communications is set as the default sound device.
Instructor Station
Downloads
Instructor Application Complete Installation - v1.0.0 - updated 25Sep15
Instructor Application Executable Only - v0.0.3 - updated 07May15
Original Documentation (SwRI)
Software Design Document - updated 01Nov04
