1166 - DSP Mainboard

General Info

Part Number: 10684

PCB Layout To-Do List

1. Create footprint for RJ-45 connector to enable mounting from top or bottom side of PCB
2. Move RJ-45 connector to the right and down at least 400-500 mils
3. Move PoE module down another 100-150 mils for clearance
4. Replace 10 pin and 14 pin headers with surface mount type (see datasheets below)
5. Move expansion headers (10 pin and 14 pin) to align with connectors on audio satellite board (in eDrawings make the body transparent or hidden to see the internal components
6. Move JTAG connector up and to the right side to avoid internal interference

Datasheet Links

10-pin SMT header

14-pin SMT header

(U1)DSP: TMS320C6424

(U17,18)DDR2 SDRAM

Implementing DDR2 PCB Layout on the TMS320C6424 DSP

(U2)NOR Flash

(U4)I2C EEPROM: 8-Lead SOIC

(U3,5,6,11,19,21)Bus Switch

(U7-9)DC-DC Converter

(U10,12,13)Supervisory Circuit

(U14,16)I2C Bus Repeater

(U15)OR Gate

(U20)Ethernet PHY Transceiver

(U22)PoE Module

(U23)Inverter

(U901)Rotary Switch

(P1) Vert RJ-45

(Y1)Crystal Oscillator: CSM-8A

(Y2)Crystal Oscillator

(L3,5,7)ELL6SH type inductor

(SW1)Reset Switch