1166 - DSP Mainboard

General Info

Part Number: 10684

PCB Layout To-Do List

1. Adjust the height of the PoE module to 1.02". The thickness of the PoE module is correct at 63 mils.
2. The PoE module has components on the back that require additional clearance. Move the PoE module down the DSP board at least 200 mils to allow clearance on the top of the enclosure.

Datasheet Links

50mil x 100 mil header

79 mil header

(U1)DSP: TMS320C6424

(U17,18)DDR2 SDRAM

Implementing DDR2 PCB Layout on the TMS320C6424 DSP

(U2)NOR Flash

(U4)I2C EEPROM: 8-Lead SOIC

(U3,5,6,11,19,21)Bus Switch

(U7-9)DC-DC Converter

(U10,12,13)Supervisory Circuit

(U14,16)I2C Bus Repeater

(U15)OR Gate

(U20)Ethernet PHY Transceiver

(P3)PoE Module

(U23)Inverter

(SW2)Rotary Switch

(P1,2) Vert RJ-45

(Y1)Crystal Oscillator: CSM-8A

(Y2)Crystal Oscillator

(L3,5,7)ELL6SH type inductor

(SW1)Reset Switch