Difference between revisions of "1166 - DSP Mainboard"
From eMDeeWiki
Jump to navigationJump to search| Line 8: | Line 8: | ||
<ol> | <ol> | ||
| − | <li>Create footprint for RJ-45 connector to enable mounting from top or bottom side of PCB -Done</li> | + | <li>Create footprint for RJ-45 connector to enable mounting from top or bottom side of PCB -'''Done'''</li> |
| − | <li>Move RJ-45 connector to the right and down at least 400-500 mils -It has been moved please verify clearance with current position </li> | + | <li>Move RJ-45 connector to the right and down at least 400-500 mils -'''It has been moved please verify clearance with current position''' </li> |
| − | <li>Move PoE module down another 100-150 mils for clearance -Done</li> | + | <li>Move PoE module down another 100-150 mils for clearance -'''Done'''</li> |
<li>Replace 10 pin and 14 pin headers with surface mount type (see datasheets below)</li> | <li>Replace 10 pin and 14 pin headers with surface mount type (see datasheets below)</li> | ||
Revision as of 14:50, 11 March 2010
General Info
Part Number: 10684
--68.157.6.30 19:49, 11 March 2010 (UTC)== PCB Layout To-Do List ==
- Create footprint for RJ-45 connector to enable mounting from top or bottom side of PCB -Done
- Move RJ-45 connector to the right and down at least 400-500 mils -It has been moved please verify clearance with current position
- Move PoE module down another 100-150 mils for clearance -Done
- Replace 10 pin and 14 pin headers with surface mount type (see datasheets below)
- Move expansion headers (10 pin and 14 pin) to align with connectors on audio satellite board (in eDrawings make the body transparent or hidden to see the internal components
- Move JTAG connector up and to the right side to avoid internal interference
Datasheet Links
Implementing DDR2 PCB Layout on the TMS320C6424 DSP
(U10,12,13)Supervisory Circuit
