Difference between revisions of "1166 - DSP Mainboard"
From eMDeeWiki
Jump to navigationJump to search| (16 intermediate revisions by 5 users not shown) | |||
| Line 2: | Line 2: | ||
Part Number: 10684 | Part Number: 10684 | ||
| − | |||
== PCB Layout To-Do List == | == PCB Layout To-Do List == | ||
<ol> | <ol> | ||
| − | <li>1. | + | |
| − | + | <li>Adjust the height of the PoE module to 1.02". The thickness of the PoE module is correct at 63 mils.</li> | |
| − | + | <li>The PoE module has components on the back that require additional clearance. Move the PoE module down the DSP board at least 200 mils to allow clearance on the top of the enclosure.</li> | |
| − | + | ||
| − | |||
</ol> | </ol> | ||
== Datasheet Links == | == Datasheet Links == | ||
| − | [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name= | + | [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=S9131-ND 50mil x 100 mil header] |
| − | [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name= | + | [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=S9036-ND 79 mil header] |
[http://focus.ti.com/lit/ds/symlink/tms320c6424.pdf (U1)DSP: TMS320C6424] | [http://focus.ti.com/lit/ds/symlink/tms320c6424.pdf (U1)DSP: TMS320C6424] | ||
| Line 42: | Line 40: | ||
[http://www.micrel.com/_PDF/Ethernet/datasheets/KS8001-ds.pdf#page=2 (U20)Ethernet PHY Transceiver] | [http://www.micrel.com/_PDF/Ethernet/datasheets/KS8001-ds.pdf#page=2 (U20)Ethernet PHY Transceiver] | ||
| − | [http://www.st.com/stonline/books/pdf/docs/15440.pdf ( | + | [http://www.st.com/stonline/books/pdf/docs/15440.pdf (P3)PoE Module] |
| − | [http:// | + | [http://focus.ti.com/lit/ds/symlink/sn74lvc2gu04.pdf (U23)Inverter] |
| − | [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=GH7256-ND ( | + | [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=GH7256-ND (SW2)Rotary Switch] |
| − | [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=380-1050-ND (P1) Vert RJ-45] | + | [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=380-1050-ND (P1,2) Vert RJ-45] |
[http://www.ecsxtal.com/store/pdf/csm-8r.pdf (Y1)Crystal Oscillator: CSM-8A] | [http://www.ecsxtal.com/store/pdf/csm-8r.pdf (Y1)Crystal Oscillator: CSM-8A] | ||
Latest revision as of 14:52, 22 March 2010
General Info
Part Number: 10684
PCB Layout To-Do List
- Adjust the height of the PoE module to 1.02". The thickness of the PoE module is correct at 63 mils.
- The PoE module has components on the back that require additional clearance. Move the PoE module down the DSP board at least 200 mils to allow clearance on the top of the enclosure.
Datasheet Links
Implementing DDR2 PCB Layout on the TMS320C6424 DSP
(U10,12,13)Supervisory Circuit
