1166 - DSP Mainboard

General Info

Part Number: 10684

PCB Layout To-Do List

1. 1. Create footprint for RJ-45 connector to enable mounting from top or bottom side of PCB
2. Move RJ-45 connector to the right and down at least 400-500 mils 3. Move PoE module down another 100-150 mils for clearance 4. Replace 10 pin and 14 pin headers with surface mount type (see datasheets below) 5.

Datasheet Links

10-pin SMT header

14-pin SMT header

(U1)DSP: TMS320C6424

(U17,18)DDR2 SDRAM

Implementing DDR2 PCB Layout on the TMS320C6424 DSP

(U2)NOR Flash

(U4)I2C EEPROM: 8-Lead SOIC

(U3,5,6,11,19,21)Bus Switch

(U7-9)DC-DC Converter

(U10,12,13)Supervisory Circuit

(U14,16)I2C Bus Repeater

(U15)OR Gate

(U20)Ethernet PHY Transceiver

(U22)PoE Module

(U23)Inverter

(U901)Rotary Switch

(P1) Vert RJ-45

(Y1)Crystal Oscillator: CSM-8A

(Y2)Crystal Oscillator

(L3,5,7)ELL6SH type inductor

(SW1)Reset Switch