Difference between revisions of "1166 - DSP Mainboard"

From eMDeeWiki
Jump to navigationJump to search
 
(20 intermediate revisions by 5 users not shown)
Line 1: Line 1:
 
 
== General Info ==
 
== General Info ==
  
 
Part Number: 10684
 
Part Number: 10684
  
 +
== PCB Layout To-Do List ==
 +
 +
<ol>
 +
 +
<li>Adjust the height of the PoE module to 1.02".  The thickness of the PoE module is correct at 63 mils.</li>
 +
<li>The PoE module has components on the back that require additional clearance.  Move the PoE module down the DSP board at least 200 mils to allow clearance on the top of the enclosure.</li>
 +
 +
</ol>
  
 
== Datasheet Links ==
 
== Datasheet Links ==
 +
 +
[http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=S9131-ND 50mil x 100 mil header]
 +
 +
[http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=S9036-ND 79 mil header]
  
 
[http://focus.ti.com/lit/ds/symlink/tms320c6424.pdf (U1)DSP: TMS320C6424]
 
[http://focus.ti.com/lit/ds/symlink/tms320c6424.pdf (U1)DSP: TMS320C6424]
Line 15: Line 26:
 
[http://www.spansion.com/Support/Datasheets/S29GL-N_01_12_e.pdf (U2)NOR Flash]
 
[http://www.spansion.com/Support/Datasheets/S29GL-N_01_12_e.pdf (U2)NOR Flash]
  
[http://ww1.microchip.com/downloads/en/DeviceDoc/21191R.pdf (U4)I2C EEPROM]
+
[http://ww1.microchip.com/downloads/en/DeviceDoc/21191R.pdf (U4)I2C EEPROM: 8-Lead SOIC]
  
 
[http://focus.ti.com/lit/ds/symlink/sn74cbtlv3384.pdf (U3,5,6,11,19,21)Bus Switch]
 
[http://focus.ti.com/lit/ds/symlink/sn74cbtlv3384.pdf (U3,5,6,11,19,21)Bus Switch]
Line 29: Line 40:
 
[http://www.micrel.com/_PDF/Ethernet/datasheets/KS8001-ds.pdf#page=2 (U20)Ethernet PHY Transceiver]
 
[http://www.micrel.com/_PDF/Ethernet/datasheets/KS8001-ds.pdf#page=2 (U20)Ethernet PHY Transceiver]
  
[http://www.st.com/stonline/books/pdf/docs/15440.pdf (U22)PoE Module]
+
[http://www.st.com/stonline/books/pdf/docs/15440.pdf (P3)PoE Module]
  
[http://www.fairchildsemi.com/ds/MM/MM74HC14.pdf (U23)Inverter]
+
[http://focus.ti.com/lit/ds/symlink/sn74lvc2gu04.pdf (U23)Inverter]
  
[http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=GH7256-ND (U901)Rotary Switch]
+
[http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=GH7256-ND (SW2)Rotary Switch]
  
[http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=380-1050-ND (P1) Vert RJ-45]
+
[http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=380-1050-ND (P1,2) Vert RJ-45]
  
 
[http://www.ecsxtal.com/store/pdf/csm-8r.pdf (Y1)Crystal Oscillator: CSM-8A]
 
[http://www.ecsxtal.com/store/pdf/csm-8r.pdf (Y1)Crystal Oscillator: CSM-8A]

Latest revision as of 14:52, 22 March 2010

General Info

Part Number: 10684

PCB Layout To-Do List

  1. Adjust the height of the PoE module to 1.02". The thickness of the PoE module is correct at 63 mils.
  2. The PoE module has components on the back that require additional clearance. Move the PoE module down the DSP board at least 200 mils to allow clearance on the top of the enclosure.

Datasheet Links

50mil x 100 mil header

79 mil header

(U1)DSP: TMS320C6424

(U17,18)DDR2 SDRAM

Implementing DDR2 PCB Layout on the TMS320C6424 DSP

(U2)NOR Flash

(U4)I2C EEPROM: 8-Lead SOIC

(U3,5,6,11,19,21)Bus Switch

(U7-9)DC-DC Converter

(U10,12,13)Supervisory Circuit

(U14,16)I2C Bus Repeater

(U15)OR Gate

(U20)Ethernet PHY Transceiver

(P3)PoE Module

(U23)Inverter

(SW2)Rotary Switch

(P1,2) Vert RJ-45

(Y1)Crystal Oscillator: CSM-8A

(Y2)Crystal Oscillator

(L3,5,7)ELL6SH type inductor

(SW1)Reset Switch