Difference between revisions of "1166 - DSP Mainboard"
From eMDeeWiki
Jump to navigationJump to searchLine 44: | Line 44: | ||
[http://www.micrel.com/_PDF/Ethernet/datasheets/KS8001-ds.pdf#page=2 (U20)Ethernet PHY Transceiver] | [http://www.micrel.com/_PDF/Ethernet/datasheets/KS8001-ds.pdf#page=2 (U20)Ethernet PHY Transceiver] | ||
− | [http://www.st.com/stonline/books/pdf/docs/15440.pdf ( | + | [http://www.st.com/stonline/books/pdf/docs/15440.pdf (P3)PoE Module] |
[http://www.fairchildsemi.com/ds/MM/MM74HC14.pdf (U23)Inverter] | [http://www.fairchildsemi.com/ds/MM/MM74HC14.pdf (U23)Inverter] | ||
− | [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=GH7256-ND ( | + | [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=GH7256-ND (SW2)Rotary Switch] |
− | [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=380-1050-ND (P1) Vert RJ-45] | + | [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=380-1050-ND (P1,2) Vert RJ-45] |
[http://www.ecsxtal.com/store/pdf/csm-8r.pdf (Y1)Crystal Oscillator: CSM-8A] | [http://www.ecsxtal.com/store/pdf/csm-8r.pdf (Y1)Crystal Oscillator: CSM-8A] |
Revision as of 10:31, 11 March 2010
General Info
Part Number: 10684
PCB Layout To-Do List
- Create footprint for RJ-45 connector to enable mounting from top or bottom side of PCB
- Move RJ-45 connector to the right and down at least 400-500 mils
- Move PoE module down another 100-150 mils for clearance
- Replace 10 pin and 14 pin headers with surface mount type (see datasheets below)
- Move expansion headers (10 pin and 14 pin) to align with connectors on audio satellite board (in eDrawings make the body transparent or hidden to see the internal components
- Move JTAG connector up and to the right side to avoid internal interference
Datasheet Links
Implementing DDR2 PCB Layout on the TMS320C6424 DSP
(U10,12,13)Supervisory Circuit